>> Hướng dẫn đặt hàng trực tuyến

Giá có thể thay đổi chưa kịp cập nhật, xin vui lòng liên hệ trực tiếp để biết giá

Tên thiết bị:   Rupert Neve Designs Portico 5042 2-Channel Tape Emulator (Vertical)

Model:   Rupert Neve Designs Portico 5042

Thương hiệu:  Rupert Neve Designs

Tình trạng: đóng hộp, hàng mới, chính hãng 100%

Hình ảnh thiết bị như hình chụp

 

 

 Product Highlights

    Tape Emulation Processor
    Tape Drive Circuit with Magnetic Head
    Transformer-Coupled Line Amplifier
    Selectable 7 or 15 IPS
    Pre-Tape Effect Trim
    Adjustable Saturation

 

 

Rupert Neve Designs 5042 overview

 

The vertical Rupert Neve Designs Portico 5042 2-Channel Tape Emulator is designed to bring the sound and harmonic content of tape to your digital recordings. It features a transformer-coupled line amplifier that feeds an actual tape drive circuit coupled to a replay amplifier EQ'd to emulate magnetic tape.

Each of the 5042's 2 channels has a pre-tape circuit trim knob along with adjustable saturation, allowing you to dial in the amount of the effect desired. The IPS button allows you to select between 7 and 15 IPS, emulating commonly used inches per second tape speed settings.

 

Controls
  • Meter: An eight-segment LED bar-graph meter is fitted for each channel, calibrated with two scales selected by the adjacent Push Button switch
  • Input Level: Calibrated: 0 dB, 2dB, 4dB, 6dB, 10dB, 14dB, 18dB 22dB
  • Tape Level: Indicates the signal level being fed to the Tape circuit, or magnetic Induction level
  • Trim: Provides + or - 12 dB adjustment of gain to compensate for incoming signal levels prior to feeding the TAPE circuit
  • Engage Tape: Inserts the "tape" circuit when pressed (illuminated). The meter push button switch then selects the meter to display Input Level or Tape Level. When Input Level is selected the meter displays the balanced signal level at the input of the Portico 5042. When Tape Level is selected the meter shows the signal level sent to the simulated "Tape Head" (Equivalent to the record level on a real tape recorder)
  • Line Up: The incoming signal level should be set by adjusting the Trim control so that the first LED starts to light (0 dB). When the meter selector is set to Tape Level there is no meter reading unless the Engage Tape push button is pressed
  • 7.5 IPS to 15 IPS: Selects the emphasis/de-emphasis, Record/Replay Tape characteristic
  • Saturation: Controls the signal level or magnetization being sent to the magnetic "tape head". At the same time the gain of the replay amplifier is reduced. As the Saturation level increases, the replay gain is reduced so that the overall In/Out signal level remains more or less constant. In a real tape recorder, you would adjust the Record and Replay gain controls separately. In the Portico 5042 the Record and Replay gain controls are coupled so that the overall In/Out signal level only varies as the "tape" saturation level changes. But as you approach the maximum Saturation setting, the overall signal level will drop due to the effect of extreme saturation

 

 

Rupert Neve Designs 5042 specs

Line Amp
Noise With Gain at Unity: Better than -100 dBu, measured at main output, un-weighted, 400 Hz to 22 kHz, terminated 40 Ω, balanced
Frequency Response Main Output, measured at +10 dBu, trim at unity:
@ 10 Hz: -0.5 dB
@ 200 kHz: -3 dB
Maximum Output Level Balanced and Floating Transformer Output: +25 dBu
THD + N Better than 0.0015% @ 1 kHz, +20 dBu output level, no load
0.250% typical; Mostly 2nd and 3rd Harmonic @ 20 Hz, +20 dBu output level, no load
Crosstalk Measured Channel to Channel: Better than 90 dB @ 16 kHz
Output Buss:
Output is designed to feed the RND 5014 Buss-mixer, Monitor Amplifier at the internal system level of 2.5 dBu. Output level of the Rupert Neve Designs 5014 is then equal to that of the 5042
Tape FX
Maximum Output Level Gain Trim at Unity, Saturation at Minimum: +25 dBu
Gain trim at Unity, Saturation at Maximum: +6 dBu
Noise Measured at Main Output, un-weighted, 400 Hz to 22 kHz, input terminated 40 Ω, Balanced:
With Gain at Unity, Saturation control at Minimum: Better than -70 dBu
With Gain at Unity, Saturation control at Maximum: Better than -90 dBu
Frequency Response Tape engaged, 7.5 IPS: -3 dB @ 16 kHz
Tape engaged, 15 IPS: -3 dB @ 20 kHz

Low frequency response varies with input gain and saturation settings
THD + N Tape Engaged: Approximately 1-2% 2nd and 3rd Harmonic below 1 kHz
Crosstalk Measured Channel-to-Channel, Maximum Saturation: Better than 80 dB @ 16 kHz

 

 

In the Box
Rupert Neve Designs Portico 5042 2-Channel Tape Emulator (Vertical)
  • Power Supply
  • Limited 1-Year Warranty

 

 

Nhà phân phối trên toàn lãnh thổ Việt Nam. Miễn phí vận chuyển tận nơi trên toàn quốc, nhận hàng thanh toán tiền
Thiết bị được phân phối bởi:  Công ty TNHH MTV Phát Triển Công Nghệ Máy Tính VNM
Hotline: 0946.112.556 - 0320.2.223.225 - 0320.3.841.496
E-mail: Product.vnm@gmail.com
Yahoo online: vnm_colorvis_sale
Hàng chính hãng, Full box, new 100%

Công ty TNHH VNM. Nhà phân phối sản phẩm chính hãng
Pin laptop chính hãng, sạc laptop chính hãng, pin máy ảnh chính hãng, sạc máy ảnh chính hãng, pin máy quay chính hãng, sạc máy quay chính hãng. Vui lòng truy cập www.chinhhangpin.com hoặc www.pinoriginal.com

 

Website trực thuộc quản lý của công ty TNHH VNM:

www.dienmayviet.vn
www.dienmayviet.com.vn
www.chinhhangpin.com
www.pinoriginal.com

Bình chọn sản phẩm: (5.0 / 1 Bình chọn)