>> Hướng dẫn đặt hàng trực tuyến
Giá mang tính tham khảo, xin vui lòng liên hệ trực tiếp để biết giá
Hình ảnh sản phẩm:
The MKH 416 transformerless, RF condenser is designed as a combination of pressure gradient and interference tube microphones. Very good feedback rejection, low proximity effect, 130 dB/SPL. Rugged and resistant to changing climate conditions. Ideal for boom, fishpole, and camera mounting.
Its excellent directivity and compact design, high consonant articulation and feedback rejection make the MKH 416 a superb all-around microphone for film, radio and television, especially for outside broadcast applications.
- Interference Tube Principle
- Pressure gradient receiver with short interference tube
- Employs RF-technology to control residual microphone noise. Optimizing the transducer's acoustic impedance results in a further improvement in low noise performance.
- The RF-design yields exceptionally low noise levels and is virtually immune to humidity and moisture.
- The comparatively low RF-voltage across the elements of the transducer also eliminates arcing and DC-bias creeping currents.
- Hypercardioid at low and medium frequency, above 2kHz approaches lobar pattern
- Very low inherent self-noise
- High sensitivity
- Transformerless and fully floating balanced output
- Rugged, suitable for adverse climatic conditions
- Matt black all-metal body
- Increased directivity
- Optimum S/N ratio
- Lower gain on input channels required
- Lowest noise and greatest signal stability
- Highly immune to humidity in all conditions. Extremely stable.
- Visually "low key"
| Transducer | Pressure Gradient/Interference Receiver Condenser |
| Polar Pattern | Supercardioid/Lobar |
| Frequency Response | 40 Hz - 20 KHz |
| Dynamic Range (Typical) | 117 dB |
| Signal-to-Noise Ratio | 81 dB |
| Maximum Input Sound Level | 130 dB, (@ 1 KHz) Sensitivity 25 mV/Pa +/- 1dB |
| Power Requirements | Phantom Power 48v, (± 12v) |
| Output Impedance | Nominal Impedance: 25 Ohms Minimum Terminating Impedance: 800 Ohms |
| Output Connectors | XLR-3M Type |
| Pad | None |
| Low Frequency Roll-Off | None |
| Applications | Film, Radio and Television, Especially for Outside Broadcast Applications. |
| Dimensions | 9.84 x 0.74 (250 x 19mm) LxDiameter |
| Weight | 5.82 oz. (175 g) |
