>> Hướng dẫn đặt hàng trực tuyến
Giá có thể thay đổi chưa kịp cập nhật, xin vui lòng liên hệ trực tiếp để biết giá
Tên thiết bị: Card âm thanh RME Babyface Pro FS 24-Channel 192 kHz Bus-Powered USB 2.0 Audio Interface
Thương hiệu: RME
Tình trạng: hàng mới, chính hãng 100%
Product Highlights
- 4 Analog Inputs, 4 Analog Outputs
- 3.5mm and 6.3mm Headphone Outputs
- FPGA Chip for DSP
- Integrated XLR Socket
- Class Compliant for Mac, PC, Linux, iPad
- SteadyClock Jitter Reduction
- TOSLINK I/O
- MIDI I/O Via Included Breakout Cable
- + 76 dB Gain, Adjustable in 1 dB Steps
- TotalMix FX Hardware Mixer
RME BABYFACE PRO FS Overview
The RME Babyface Pro FS 24-Channel 192 kHz USB 2.0 Bus-Powered Audio Interface is designed for a wide variety of studio and live recording applications. Users of the original Babyface Pro will recognize the look of this portable interface, with its dedicated XLR sockets and parallel phone jacks (1/4", 3.5mm, and TRS connections).
Familiar users will be delighted at the new improvements offered in the Babyface Pro FS. RME has implemented a +19/+4 dBu switch on the bottom to reduce the output level, allowing you to optimize the signal-to-noise ratio of the preamps on a case by case basis. The clocking, already high-quality, has been improved to provide ultralow jitter and jitter immunity. The 3.5mm headphone output power has risen from 70 to 90mW, and both headphone outputs sport improved THD up to 10 dB. Latency now has a typical delay of 5 samples AD and 7 samples DA, one-fifth of previous generations. These are just some of the improvements.
The interface ships with the company's TotalMix FX, a software mixer available for Windows, Mac OS X, and iOS. When using the device with an iPad, an external power adapter must be used, as the iPad alone is unable to power the interface. The mixer software allows you to use the interface in a wide variety of situations, from the simple mixing of signals to more complicated routing configurations.
The unit's FPGA-based DSP mixer adds a flexible 3-band parametric equalizer on all inputs and outputs. Delay and reverb are also on hand. Achieving sample rates and resolutions of up to 192 kHz / 24-bit, the interface offers a professional recording solution in a compact form factor.
New Features over Previous Babyface Pro
- +19/+4 dBu switch on the bottom adds a direct way to reduce the output level, improving SNR for sensitive active monitors, as well as avoiding distortion/overloads, and keeping TotalMix FX faders near 0 dB instead of high attenuations
- Full SteadyClock FS circuit for ultralow jitter and high jitter immunity
- 3.5 mm TRS phones output power rises from 70 mW to 90 mW
- THD of both phones outputs improved by up to 10 dB
- Uses same output opamps as ADI-2 Pro
- Output impedance of 3.5 mm TRS lowered from 2 to 0.1 ohm
- Mic inputs SNR improved from 112.2 to 113.7 dB
- TRS line inputs SNR improved from 114 to 116 dB RMS (120 dBA)
- THD line inputs improved by 8 dB
- Latency improved by six samples on the AD side by new ADC (5 samples AD, 7 samples DA)
- No increase in power consumption, despite new features
- K-slot for theft protection
RME BABYFACE PRO FS Specs
Form Factor | Tabletop |
Display | None |
Channels of I/O | Analog: 4 Input / 4 Output Digital: 12 Input / 12 Output |
Max Sample Rate/Resolution | 192 kHz / 24-Bit |
Number of Mic Preamps | 2 |
Expansion Slots | None |
Analog Audio I/O | 2 x XLR 3-Pin Balanced Mic/Line Input 2 x 1/4" TS Unbalanced Line/Hi-Z Input 2 x XLR 3-Pin Balanced Monitor Output 1 x 1/4" TRS Unbalanced Headphone Output 1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output |
Digital Audio I/O | 1 x TOSLINK Optical ADAT / S/PDIF Input 1 x TOSLINK Optical ADAT / S/PDIF Output |
Host Connection / USB | 1 x USB Type-B (USB 3.0 / 3.1 Gen 1) |
MIDI I/O | None |
Wireless Connectivity | None |
Memory Card Slot | None |
Frequency Response | Mic, Line Inputs: 18 Hz to 20.8 kHz -0.1 dB (at 44.1 kHz) 7 Hz to 45.8 kHz -0.5 dB (at 96 kHz) 5 Hz to 88 kHz (at 192 kHz) Line, Hi-Z Inputs: 5 Hz to 20.8 kHz -0.1 dB (at 44.1 kHz) 3 Hz to 45.8 kHz -0.5 dB (at 96 kHz) 2 Hz to 92 kHz -1 dB (at 192 kHz) Line Outputs: 0 Hz to 20.8 kHz -0.5 dB (at 44.1 kHz) 0 Hz to 45 kHz -0.5 dB (at 96 kHz) 0 Hz to 89 kHz -1 dB (at 192 kHz) |
Gain/Trim Range | Mic/Line/Hi-Z Inputs: -11 dB to +65 dB |
Max Input Level | Mic Inputs: +8 dBu (Min Gain) +19 dBu (with Pad) -57 dBu (Max Gain) -46 dBu (with Pad) Line/Hi-Z Inputs: +13 dBu (+4 dBu) -5 dBu (-10 dBV) |
Headphone Output Power | 60 mW into 10 Ohms (Max) 90 mW into 1000 Kilohms (Max) |
Impedance | Mic/Line Inputs: 2 to 5.2 Kilohms (Balanced) 1 to 2.6 Kilohms (Unbalanced) Line/Hi-Z Inputs: 1 Megohm Line Outputs: 300 Ohms (Balanced) 150 Ohms (Unbalanced) Headphone Outputs: 10 Ohms (Unbalanced) 0.1 Ohm (Unbalanced) |
Dynamic Range | D/A Converters: 115 dB RMS 118 dBA |
SNR | Mic/Line Inputs: 113.7 dB RMS 117 dBA Line/Hi-Z Inputs: 116 dB RMS 120 dBA Line Outputs: 114.8 dB RMS 118 dBA |
THD | Line Outputs: -106 dB / 0.0005% Line/Mic Inputs: -112 dB / 0.00024% -115 dB / 0.00016% (+30 dB Gain) |
THD+N | Mic/Line Inputs: < -108 dB / < 0.00035% < -100 dB / < 0.001% Line Outputs: < -102 dB / 0.0008% |
Channel Separation | Mic/LineInputs: > 110 dB LineOutputs: > 110 dB |
Sample Rates | Up to 200 kHz |
Bit Depths | Up to 24-Bit |
Sync Sources | ADAT |
OS Compatibility | macOS Windows iOS |
Included Software | None |
Supported Drivers/API & Plug-Ins | macOS Class-Compliant (No Driver Needed) ASIO |
Power Requirements | AC/DC Power Adapter (Not Included), USB Bus Power |
Power Consumption | 2.8 W (Idle) 3.7 W (Typical) 5.4 W (Maximum) |
Anti-Theft Features | Kensington Security Slot |
Operating Humidity | 75% (Recommended) |
Operating Temperature | 41 to 122°F / 5 to 50°C |
Dimensions | 7.13 x 4.25 x 1.38" / 18.11 x 10.79 x 3.51 cm |
Weight | 1.5 lb / 680.0 g |
Package Weight | 3.73 lb |
Box Dimensions (LxWxH) | 11.6 x 6.3 x 3.3" |
In the Box
- RME Babyface Pro FS 24-Channel 192 kHz Bus-Powered USB 2.0 Audio Interface
- MIDI Breakout Cable
- USB Type-B to USB Type-A Cable
- USB Type-B to USB Type-C Cable
- Carrying Box
- Limited 2-Year Warranty
Chúng tôi vận chuyển tận nơi trên toàn quốc, nhận hàng thanh toán tiền cho người giao hàng. Hà Nội nhận hàng trong ngày. Các tỉnh khác nhận hàng 1 -2 ngày
Liên hệ: 0946.112.556 - 0320.2.223.225 - 0320.3.841.496.
© Bản quyền thuộc về công ty TNHH VNM
www.dienmayviet.com.vn www.dienmayviet.vn
Nhà phân phối trên toàn lãnh thổ Việt Nam. Miễn phí vận chuyển tận nơi trên toàn quốc, nhận hàng thanh toán tiền
Thiết bị được phân phối bởi: Công ty TNHH MTV Phát Triển Công Nghệ Máy Tính VNM
Hotline: 0946.112.556 - 0320.2.223.225 - 0320.3.841.496
E-mail: Product.vnm@gmail.com
Yahoo online: vnm_colorvis_sale
Hàng chính hãng, Full box, new 100%
Công ty TNHH VNM. Nhà phân phối sản phẩm chính hãng
Pin laptop chính hãng, sạc laptop chính hãng, pin máy ảnh chính hãng, sạc máy ảnh chính hãng, pin máy quay chính hãng, sạc máy quay chính hãng. Vui lòng truy cập www.chinhhangpin.com hoặc www.pinoriginal.com
Website trực thuộc quản lý của công ty TNHH VNM:
www.dienmayviet.vn
www.dienmayviet.com.vn
www.chinhhangpin.com
www.pinoriginal.com